> head unit 80x4

Oztec 1.2 OZ This electric motor is manufactured to exact specifications to withstand the rough day to day abuses associated with construction sites. Lightweight, compact and fitted with our comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. This 1.25 HP Electric Concrete Vibrator Power Unit come standard with the Quick Disconnect "QD" system. Changing shafts and heads on the job is a snap. Features: -Tough, rugged, lightweight and durable -Used on the job site for over 30 years -Meets all United States OSHA and Canadian safety standards -Wrap around protective frame -Shock absorbers -11,000 to 12,000 VPM (never drops below 10,000 VPM) -Motor is protected from damage even when dropped or thrown from heights of over six feet -Comes standard with the Quick Disconnect "QD" system -Fitted with a comfortable adjustable shoulder strap Specifications: -Motor: 115V - 50/60Hz - 1 phase AC/DC -Horsepower: 1.25 Hp -Amps: 9 -Max Steel Head Size: 1.5" -Max Rubber Head Size: None -VPM: 11,000 to 12,000 VPM (never drops below 10,000 VPM) -Weight: 12 lbs Warranty: -Limted Lifetime Warranty Steel Vibrator Heads Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. This 1" Steel Vibrator Head offers superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete. Features: -Highest amplitude and centrifugal force, generating the largest radius of influence -Used with Electric or Gas power units -Standard of the industry for use in most applications Specifications for 1" Steel Vibrator Head: -Centrifugal Force: 220 lbs -Compaction Rate: 2 - 4 cu.yds/hr -Radius of Action: 4" -Overall Dimensions: 1" x 13" Specifications for 1 - 1/4" Steel Vibrator Head: -Centrifugal Force: 510 lbs -Compaction Rate: 2 - 5 cu.yds/hr -Radius of Action: 5" -Overall Dimensions: 1 - 1/4" x 13" Specifications for 1 - 1/2" Steel Vibrator Head: -Centrifugal Force: 920 lbs -Compaction Rate: 5 - 8 cu.yds/hr -Radius of Action: 6" -Overall Dimensions: 1 - 1/2" x 14" Specifications for 1 - 1/4" x 6" Vibrator Short Head: -Overall Dimensions: 1 - 1/4" x 6" Rubber Tip for 1" Steel Head -Match with 1" Steel Head -Rubber tips are factory installed on steel heads Rubber Tip for 1 - 1/2" Steel Head -Match with 1 - 1/2" Steel Head -Rubber tips are factory installed on steel heads Rubber Tip for 1 - 1/4" Steel Head -Match with 1 - 1/4" Steel Head -Rubber tips are factory installed on steel heads 3/4 x 12" Pencil Head -For Fill Cell Block -Mild Vibration Pencil Head - High frequency, low amplitude -Radius of Action: 3" -Centrifugal Force: 155 lbs -Compaction Rate: 1 - 3 cu.yds/hr -Overall Dimensions: 3/4 x 12" 3/4 x 6" Short Pencil Head -For Fill Cell Block -Mild Vibration Pencil Head - High frequency, low amplitude -Overall Dimensions: 3/4 x 6" Flexible Shafts When transmitting

Oztec GV - 5x This electric motor is manufactured to exact specifications to withstand the rough day to day abuses associated with construction sites. Lightweight, compact and fitted with our comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. This 3.25 HP Electric Concrete Vibrator Power Unit come standard with the Quick Disconnect "QD" system. Changing shafts and heads on the job is a snap. Features: -Tough, rugged, lightweight and durable -Used on the job site for over 30 years -Meets all United States OSHA and Canadian safety standards -Wrap around protective frame -Shock absorbers -Motor is protected from damage even when dropped or thrown from heights of over six feet -Comes standard with the Quick Disconnect "QD" system -Fitted with a comfortable adjustable shoulder strap Specifications: -Motor: 115V - 50/60Hz - 1 phase AC/DC -Horsepower: 3.25 Hp -Amps: 9 -Max Steel Head Size: 2.5" -Max Rubber Head Size: 2.75" -Weight: 19 lbs Warranty -Limited Lifetime Warranty Steel Vibrator Heads Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. The Steel Vibrator Heads offers superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete. Features: -Highest amplitude and centrifugal force, generating the largest radius of influence -Used with Electric or Gas power units -Standard of the industry for use in most applications Specifications for 1" Steel Vibrator Head: -Centrifugal Force: 220 lbs -Compaction Rate: 2 - 4 cu.yds/hr -Radius of Action: 4" -Overall Dimensions: 1" x 13" Specifications for 1 - 1/4" Steel Vibrator Head: -Centrifugal Force: 510 lbs -Compaction Rate: 2 - 5 cu.yds/hr -Radius of Action: 5" -Overall Dimensions: 1 - 1/4" x 13" Specifications for 1 - 1/2" Steel Vibrator Head: -Centrifugal Force: 920 lbs -Compaction Rate: 5 - 8 cu.yds/hr -Radius of Action: 6" -Overall Dimensions: 1 - 1/2" x 14" Specifications for 1 - 3/4" Steel Vibrator Head: -Centrifugal Force: 1200 lbs -Compaction Rate: 8 - 16 cu.yds/hr -Radius of Action: 9" -Overall Dimensions: 1 - 3/4" x 14" Specifications for 2" Steel Vibrator Head: -Centrifugal Force: 1500 lbs -Compaction Rate: 12 - 20 cu.yds/hr -Radius of Action: 11" -Overall Dimensions: 2" x 14" Specifications for 2 -1/2" Steel Vibrator Head: -Centrifugal Force: 1850 lbs -Compaction Rate: 23 - 30 cu.yds/hr -Radius of Action: 13" -Overall Dimensions: 2 - 1/2" x 13" Rubber Vibrator Heads Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency "RubberHeads" vibrator heads not only meet DOT non-metal head specifications for protecting coated rebar and

Oztec BP - 35 Powerful, portable and reliable this 1.75 HP Gas Backpack Concrete Vibrator Power Unit, provides ultimate and immediate adaptability on the job. Utilizing a rugged and dependable Honda gasoline engine, coupled to a"speed-up" transmission, vibrator heads develop 12,000 vpm and never drop below 10,000vpm, even in the heaviest low slump concrete loads. (Tested in near 0 slump concrete). This 10,000 - 12,000vpm range is essential for high-quality concrete. Mounted on very comfortable frame, this OZTEC backpack vibrator allows operators incredible maneuverability around the job. Run time with full tank approximately 1 hour plus. Features: -Quick disconnect system -Speed-Up transmission -Backpack model -Powerful, portable and reliable -Mounted on comfortable frame -10,000 - 12,000vpm range Specifications: -Engine: Honda, 4 stroke -Horsepower: 1.75 Hp -Max Steel Head Size: 1.5" -Max Rubber Head Size: None -Weight: 15 lbs Warranty -Limited Lifetime Warranty Steel Vibrator Heads Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. The Steel Vibrator Heads offers superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete. Features: -Highest amplitude and centrifugal force, generating the largest radius of influence -Used with Electric or Gas power units -Standard of the industry for use in most applications Specifications for 1" Steel Vibrator Head: -Centrifugal Force: 220 lbs -Compaction Rate: 2 - 4 cu.yds/hr -Radius of Action: 4" -Overall Dimensions: 1" x 13" Specifications for 1 - 1/4" Steel Vibrator Head: -Centrifugal Force: 510 lbs -Compaction Rate: 2 - 5 cu.yds/hr -Radius of Action: 5" -Overall Dimensions: 1 - 1/4" x 13" Specifications for 1 - 1/2" Steel Vibrator Head: -Centrifugal Force: 920 lbs -Compaction Rate: 5 - 8 cu.yds/hr -Radius of Action: 6" -Overall Dimensions: 1 - 1/2" x 14" Specifications for 1 - 1/4" x 6" Vibrator Short Head: -Overall Dimensions: 1 - 1/4" x 6" Specifications for 1 - 3/4" x 6" Vibrator Short Head: -Overall Dimensions: 1 - 3/4" x 6" Rubber Tip for 1" Steel Head -Match with 1" Steel Head -Rubber tips are factory installed on steel heads Rubber Tip for 1 - 1/2" Steel Head -Match with 1 - 1/2" Steel Head -Rubber tips are factory installed on steel heads Rubber Tip for 1 - 1/4" Steel Head -Match with 1 - 1/4" Steel Head -Rubber tips are factory installed on steel heads 3/4 x 12" Pencil Head -For Fill Cell Block -Mild Vibration Pencil Head - High frequency, low amplitude -Radius of Action: 3" -Centrifugal Force: 155 lbs -Compaction Rate: 1 - 3 cu.yds/hr -Overall Dimensions: 3/4 x 12" 3/4 x 6" Short Pencil Head -For Fill Cell Block -Mild Vibration Pencil Head - High frequency, low amplitude -Overall Dimensions: 3/4 x 6" Flexible Shafts When transmitting power from the power source to the vibrating head, selec

Oztec 1.8 OZ This electric motor is manufactured to exact specifications to withstand the rough day to day abuses associated with construction sites. Lightweight, compact and fitted with our comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. This 1.75 HP Electric Concrete Vibrator Power Unit come standard with the Quick Disconnect "QD" system. Changing shafts and heads on the job is a snap. Features: -Tough, rugged, lightweight and durable -Used on the job site for over 30 years -Meets all United States OSHA and Canadian safety standards -Wrap around protective frame -Shock absorbers -11,000 to 12,000 VPM (never drops below 10,000 VPM) -Motor is protected from damage even when dropped or thrown from heights of over six feet -Comes standard with the Quick Disconnect "QD" system -Fitted with a comfortable adjustable shoulder strap Specifications: -Motor: 115V - 50/60Hz - 1 phase AC/DC -Horsepower: 1.75 Hp -Amps: 15 -Max Steel Head Size: 1.75" -Max Rubber Head Size: None -Weight: 16 lbs Warranty -Limited Lifetime Warranty Steel Vibrator Heads Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. The Steel Vibrator Heads offer superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete. Features: -Highest amplitude and centrifugal force, generating the largest radius of influence -Used with Electric or Gas power units -Standard of the industry for use in most applications Specifications for 1" Steel Vibrator Head: -Centrifugal Force: 220 lbs -Compaction Rate: 2 - 4 cu.yds/hr -Radius of Action: 4" -Overall Dimensions: 1" x 13" Specifications for 1 - 1/4" Steel Vibrator Head: -Centrifugal Force: 510 lbs -Compaction Rate: 2 - 5 cu.yds/hr -Radius of Action: 5" -Overall Dimensions: 1 - 1/4" x 13" Specifications for 1 - 1/2" Steel Vibrator Head: -Centrifugal Force: 920 lbs -Compaction Rate: 5 - 8 cu.yds/hr -Radius of Action: 6" -Overall Dimensions: 1 - 1/2" x 14" Specifications for 1 - 3/4" Steel Vibrator Head: -Centrifugal Force: 1200 lbs -Compaction Rate: 8 - 16 cu.yds/hr -Radius of Action: 9" -Overall Dimensions: 1 - 3/4" x 14" Specifications for 1 - 1/4" x 6" Vibrator Short Head: -Overall Dimensions: 1 - 1/4" x 6" Specifications for 1 - 3/4" x 6" Vibrator Short Head: -Overall Dimensions: 1 - 3/4" x 6" Rubber Tip for 1" Steel Head -Match with 1" Steel Head -Rubber tips are factory installed on steel heads Rubber Tip for 1 - 1/2" Steel Head -Match with 1 - 1/2" Steel Head -Rubber tips are factory installed on steel heads Rubber Tip for 1 - 1/4" Steel Head -Match with 1 - 1/4" Steel Head -Rubber tips are factory installed on steel heads Rubber Tip for 1 - 3/4" Steel Head -Match with 1 - 3/4" Steel Head -Rubber tips are factory installed on steel heads 3/4 x 12" Pencil Head -For Fill

FOR SALE IS A NEW 80 WATT,4 HEAD STROBE HIDE AWAY PACKAGE.THIS SYSTEM INCLUDES EVERY THING NEEDED FOR INSTALLATION. FEATURES: 4 GRAUMET MOUNT STROBE BULBS (1" HOLE REQUIRED FOR INSTALLATION) 1/ 80 WATT POWER SUPPLY 4 SELECTABLE FLASH PATTERNS 2/ 20FT. CABLES 2/ 10 FT. CABLES CONTROL UNIT WITH AUX. SWITCH. THANKS FOR LOOKING, PLEASE CHECK OUT OUR OTHER ITEMS, FOR SOME GREAT DEALS ON EBAY.

The secret in making high quality electrodes is in the materials. Electrodes are all available through LGMedSupply. They are constructed with a uniquely coated (Ag) SILVER carbon film. This conductive (Ag) Silver disperses the electrical current uniformly over the entire electrode surface. They also contain lead wires with dispersive heads that lock securely into each electrode. These dispersive heads help provide a more consistent electrical pulse throughout the electrode. Our electrodes contain only the best gels on the market to give you added reusability and performance you desire. These electrodes are universal and are compatible with most Units on the Market. Our high quality electrodes will last for approximately 20-30 treatments and work with every single one of our units. All electrodes are: Latex Safe Highly Conductive (pure Ag coated) Excellent Dispersion (over whole surface of electrode) FDA and ISO- 13485/EN46002 Registered CE Marked

Oztec 3.2 OZ This electric motor is manufactured to exact specifications to withstand the rough day to day abuses associated with construction sites. Lightweight, compact and fitted with our comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. This 3.25 HP Electric Concrete Vibrator Power Unit come standard with the Quick Disconnect "QD" system. Changing shafts and heads on the job is a snap. Features: -Tough, rugged, lightweight and durable -Used on the job site for over 30 years -Meets all United States OSHA and Canadian safety standards -Wrap around protective frame -Shock absorbers -Motor is protected from damage even when dropped or thrown from heights of over six feet -Comes standard with the Quick Disconnect "QD" system -Fitted with a comfortable adjustable shoulder strap Specifications: -Motor: 115V - 50/60Hz - 1 phase AC/DC -Horsepower: 3.25 Hp -Amps: 9 -Max Steel Head Size: 2.5" -Max Rubber Head Size: 2.75" -Weight: 19 lbs Warranty -Limited Lifetime Warranty Steel Vibrator Heads Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. The Steel Vibrator Heads offers superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete. Features: -Highest amplitude and centrifugal force, generating the largest radius of influence -Used with Electric or Gas power units -Standard of the industry for use in most applications Specifications for 1" Steel Vibrator Head: -Centrifugal Force: 220 lbs -Compaction Rate: 2 - 4 cu.yds/hr -Radius of Action: 4" -Overall Dimensions: 1" x 13" Specifications for 1 - 1/4" Steel Vibrator Head: -Centrifugal Force: 510 lbs -Compaction Rate: 2 - 5 cu.yds/hr -Radius of Action: 5" -Overall Dimensions: 1 - 1/4" x 13" Specifications for 1 - 1/2" Steel Vibrator Head: -Centrifugal Force: 920 lbs -Compaction Rate: 5 - 8 cu.yds/hr -Radius of Action: 6" -Overall Dimensions: 1 - 1/2" x 14" Specifications for 1 - 3/4" Steel Vibrator Head: -Centrifugal Force: 1200 lbs -Compaction Rate: 8 - 16 cu.yds/hr -Radius of Action: 9" -Overall Dimensions: 1 - 3/4" x 14" Specifications for 2" Steel Vibrator Head: -Centrifugal Force: 1500 lbs -Compaction Rate: 12 - 20 cu.yds/hr -Radius of Action: 11" -Overall Dimensions: 2" x 14" Specifications for 2 -1/2" Steel Vibrator Head: -Centrifugal Force: 1850 lbs -Compaction Rate: 23 - 30 cu.yds/hr -Radius of Action: 13" -Overall Dimensions: 2 - 1/2" x 13" Rubber Vibrator Heads Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency "RubberHeads" vibrator heads not only meet DOT non-metal head specifications for protecting coated rebar and

Oztec GV - 5Wx This electric motor is manufactured to exact specifications to withstand the rough day to day abuses associated with construction sites. Lightweight, compact and fitted with our comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. This 3.25 HP Electric Concrete Vibrator Power Unit come standard with the Quick Disconnect "QD" system. Changing shafts and heads on the job is a snap. Features: -Tough, rugged, lightweight and durable -Used on the job site for over 30 years -Meets all United States OSHA and Canadian safety standards -Wrap around protective frame -Shock absorbers -Motor is protected from damage even when dropped or thrown from heights of over six feet -Comes standard with the Quick Disconnect "QD" system -Fitted with a comfortable adjustable shoulder strap Specifications: -Motor: 115V - 50/60Hz - 1 phase AC/DC -Horsepower: 3.25 Hp -Amps: 9 -Max Steel Head Size: 2.5" -Max Rubber Head Size: 2.75" -Weight: 19 lbs Warranty -Limited Lifetime Warranty Steel Vibrator Heads Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. The Steel Vibrator Heads offers superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete. Features: -Highest amplitude and centrifugal force, generating the largest radius of influence -Used with Electric or Gas power units -Standard of the industry for use in most applications Specifications for 1" Steel Vibrator Head: -Centrifugal Force: 220 lbs -Compaction Rate: 2 - 4 cu.yds/hr -Radius of Action: 4" -Overall Dimensions: 1" x 13" Specifications for 1 - 1/4" Steel Vibrator Head: -Centrifugal Force: 510 lbs -Compaction Rate: 2 - 5 cu.yds/hr -Radius of Action: 5" -Overall Dimensions: 1 - 1/4" x 13" Specifications for 1 - 1/2" Steel Vibrator Head: -Centrifugal Force: 920 lbs -Compaction Rate: 5 - 8 cu.yds/hr -Radius of Action: 6" -Overall Dimensions: 1 - 1/2" x 14" Specifications for 1 - 3/4" Steel Vibrator Head: -Centrifugal Force: 1200 lbs -Compaction Rate: 8 - 16 cu.yds/hr -Radius of Action: 9" -Overall Dimensions: 1 - 3/4" x 14" Specifications for 2" Steel Vibrator Head: -Centrifugal Force: 1500 lbs -Compaction Rate: 12 - 20 cu.yds/hr -Radius of Action: 11" -Overall Dimensions: 2" x 14" Specifications for 2 -1/2" Steel Vibrator Head: -Centrifugal Force: 1850 lbs -Compaction Rate: 23 - 30 cu.yds/hr -Radius of Action: 13" -Overall Dimensions: 2 - 1/2" x 13" Rubber Vibrator Heads Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency "RubberHeads" vibrator heads not only meet DOT non-metal head specifications for protecting coated rebar and

Oztec BP - 50a 2.5 HP Gas Backpack Concrete Vibrator Power Unit Powerful, portable and reliable this 2.5 HP Gas Backpack Concrete Vibrator Power Unit, provides ultimate and immediate adaptability on the job. Utilizing a rugged and dependable Honda gasoline engine, coupled to a"speed-up" transmission, vibrator heads develop 12,000 vpm and never drop below 10,000vpm, even in the heaviest low slump concrete loads. (Tested in near 0 slump concrete). This 10,000 - 12,000vpm range is essential for high-quality concrete. Mounted on very comfortable frame, this OZTEC backpack vibrator allows operators incredible maneuverability around the job. Run time with full tank approximately 1 hour plus. This BP-50a is equipped with a totally enclosed rotary throttle allowing the operator to comfortably control the engine while preventing wet concrete from entering and clogging the throttle mechanism. Features: -Quick disconnect system -Totally enclosed rotary throttle -Kill switch -Speed-Up transmission -Backpack model -Powerful, portable and reliable -Mounted on comfortable frame -10,000 - 12,000vpm range Specifications: -Engine: Honda, 4 stroke -Horsepower: 2.5 Hp -Max Steel Head Size: 2.5" -Max Rubber Head: 2.5" -Weight: 25 lbs Warranty -Limited Lifetime Warranty Steel Vibrator Heads Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. The Steel Vibrator Heads offers superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete. Features: -Highest amplitude and centrifugal force, generating the largest radius of influence -Used with Electric or Gas power units -Standard of the industry for use in most applications Specifications for 1" Steel Vibrator Head: -Centrifugal Force: 220 lbs -Compaction Rate: 2 - 4 cu.yds/hr -Radius of Action: 4" -Overall Dimensions: 1" x 13" Specifications for 1 - 1/4" Steel Vibrator Head: -Centrifugal Force: 510 lbs -Compaction Rate: 2 - 5 cu.yds/hr -Radius of Action: 5" -Overall Dimensions: 1 - 1/4" x 13" Specifications for 1 - 1/2" Steel Vibrator Head: -Centrifugal Force: 920 lbs -Compaction Rate: 5 - 8 cu.yds/hr -Radius of Action: 6" -Overall Dimensions: 1 - 1/2" x 14" Specifications for 1 - 3/4" Steel Vibrator Head: -Centrifugal Force: 1200 lbs -Compaction Rate: 8 - 16 cu.yds/hr -Radius of Action: 9" -Overall Dimensions: 1 - 3/4" x 14" Specifications for 2" Steel Vibrator Head: -Centrifugal Force: 1500 lbs -Compaction Rate: 12 - 20 cu.yds/hr -Radius of Action: 11" -Overall Dimensions: 2" x 14" Specifications for 2 -1/2" Steel Vibrator Head: -Centrifugal Force: 1850 lbs -Compaction Rate: 23 - 30 cu.yds/hr -Radius of Action: 13" -Overall Dimensions: 2 - 1/2" x 13" Rubber Vibrator Heads Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with

Northrock PRO50 When concrete consolidation is required for remote or mobile applications, there's nothing like a Northrock Backpack Vibrator System. These units are designed for use where electrical power is not conveniently available or for applications where extra mobility is desired. This unit is lightweight yet powerful enough to drive shafts of 7', 10' or 14' and vibrator heads up to 2" in diameter. Features: - The engine swivels 260 for either right- or left-hand side operation for maximum flexibility and minimum fatigue -Backpack design for easy mobility -Kill switch and engine throttle are located on the side for easy operation -Assembles and disassembles in seconds -Designed for ease of operation and operator comfort -Offer just the right 10,000 vpm mid-frequency and force characteristics required to set material particles in motion fast Specifications: -Engine: Two cycle, 50cc, Emak -Horsepower: 2.5 Hp -Max head diameter:2" -Flexible shaft lengths: 7', 10' or 14' -Vibrator head lengths: From 3/4" to 2" -Weight: 19 lbs Warranty: -Lifetime Warranty Backpack_Concrete _Vibrator-Manual 3/4" Backpack Vibrator Head -3/4" head for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 1" Backpack Vibrator Head -1" head for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 1-1/4" Backpack Vibrator Head -1-1/4" head for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 1-1/2" Backpack Vibrator Head -1-1/2" head for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 1-3/4" Backpack Vibrator Head -1-3/4" head for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 2" Backpack Vibrator Head -2" head for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 7' Backpack Type Shaft -7' shaft for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 10' Backpack Type Shaft -10' shaft for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit 14' Backpack Type Shaft -14' shaft for use with 2.5 hp Gas Backpack Concrete Vibrator Power Unit

BELL GOSSET INLINE MOUNTED CENTRIFUGAL PUMP 80 4X9.5 You are bidding on a new Bell Gosset Series 80 Inline Mounted Centrifugal Pump.Model: 80 4x9.5 8.75 This item is brand new and fully guaranteed. HP: 10 1800 RPM GPM: 344 / 60ft Flange Size: 4" US Motors Model: G29312 (230/460V) We would be happy to load on your truck at no charge or assist in planning the most economical delivery. Very competitive Shipping rates for our always welcomed International bidders. NO RESERVE - WE ALWAYS COMBINE SH

Intelect® TranSport ComboThe Intelect® TranSport line of portable therapy products is equally as adept on the go as it is in the clinic. Each unit’s unique design allows it be to be used for tabletop, wall mount, therapy cart or mobile use. Its lightweight design, batterypowered option and custom carrying bag allow you to conveniently take the clinic out of the clinic. 5cm² soundhead is included with the unit.• Fully functional 1 and 3.3 MHz frequencies• Two channels of electrical stimulation output• Ten user-defined memory positions for user protocols• Four standard waveforms on board: interferential, premodulated, Russian and high volt• Pulsed and continuous therapy operation(10%, 20%, 50% and 100%)• Independent intensity and parameter controls for each channel• Ergonomically designed sound head applicators available in a variety of sizes (1 cm², 2 cm², 5 cm² and 10 cm²)• All sound head applicators are interchangeable due to Electronic Signature™ residing on all transducers• Soundheads are watertight for use in underwater therapy• Head warming feature on all sound head applicators• Unit uniquely designed for tabletop, wall mount, therapy cart or mobile use• 110V or battery powered option• Weight: 5 lbs• Dimensions: 12.9"L x 11.3"W x 10.1"H• Optional therapy cart integrates with the unit to maximize storage of clinical supplies. Standard Accessories:5cm2 Sound Head Applicator Conductor™ Ultrasound Gel - 8.5oz (250 ml) Bottle (1x) Electrotherapy Leadwire Channel 1 Electrotherapy Leadwire Channel 2DURA-STICK® II 2.75 in (7cm) Round Electrodes (4x)*This item must be ordered by a licensed healthcare professional.

Intelect® TranSport ComboThe Intelect® TranSport line of portable therapy products is equally as adept on the go as it is in the clinic. Each unit’s unique design allows it be to be used for tabletop, wall mount, therapy cart or mobile use. Its lightweight design, batterypowered option and custom carrying bag allow you to conveniently take the clinic out of the clinic. 5cm² soundhead is included with the unit.• Fully functional 1 and 3.3 MHz frequencies• Two channels of electrical stimulation output• Ten user-defined memory positions for user protocols• Four standard waveforms on board: interferential, premodulated, Russian and high volt• Pulsed and continuous therapy operation(10%, 20%, 50% and 100%)• Independent intensity and parameter controls for each channel• Ergonomically designed sound head applicators available in a variety of sizes (1 cm², 2 cm², 5 cm² and 10 cm²)• All sound head applicators are interchangeable due to Electronic Signature™ residing on all transducers• Soundheads are watertight for use in underwater therapy• Head warming feature on all sound head applicators• Unit uniquely designed for tabletop, wall mount, therapy cart or mobile use• 110V or battery powered option• Weight: 5 lbs• Dimensions: 12.9"L x 11.3"W x 10.1"H• Optional therapy cart integrates with the unit to maximize storage of clinical supplies. Standard Accessories:5cm2 Sound Head Applicator Conductor™ Ultrasound Gel - 8.5oz (250 ml) Bottle (1x) Electrotherapy Leadwire Channel 1 Electrotherapy Leadwire Channel 2DURA-STICK® II 2.75 in (7cm) Round Electrodes (4x)*This item must be ordered by a licensed healthcare professional.

Midwest's Single-Height Portable Stage & Seated Riser Unit is easy to set up and take down for all of your school's performances. A heavy-gauge steel frame supports the solid plywood deck that stands up to years of heavy use. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Supports 200 lbs per square foot and folds to less than 2" high for storage and transport. Choose from two polypropylene colors and two metal colors.

Adjust Midwest's Dual-Height Portable Stage & Seated Riser Unit from two different heights in a snap. A heavy-gauge steel frame supports the solid plywood deck with your choice of hardwood, polypropylene or carpet surface. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Folds to less than 2" high for storage and transportation. Choose from two polypropylene colors and two metal colors.

Midwest's Single-Height Portable Stage and Seated Riser Unit is easy to set up and take down for all of your school's performances. A heavy-gauge steel frame supports the solid plywood deck that stands up to years of heavy use. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Supports 200 pounds per square foot and folds to less than two inches high for storage and transport. Choose from six attractive carpet colors and two metal colors.

Midwest's Single-Height Portable Stage & Seated Riser Unit is easy to set up and take down for all of your school's performances. A heavy-gauge steel frame supports the solid plywood deck that stands up to years of heavy use. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Supports 200 lbs per square foot and folds to less than 2" high for storage and transport. Choose from two polypropylene colors and two metal colors.

Midwest's Single-Height Portable Stage and Seated Riser Unit is easy to set up and take down for all of your school's performances. A heavy-gauge steel frame supports the solid plywood deck that stands up to years of heavy use. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Supports 200 pounds per square foot and folds to less than two inches high for storage and transport. Choose from six attractive carpet colors and two metal colors.

Adjust Midwest's Dual-Height Portable Stage & Seated Riser Unit from two different heights in a snap. A heavy-gauge steel frame supports the solid plywood deck with your choice of hardwood, polypropylene or carpet surface. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Folds to less than 2" high for storage and transportation. Choose from six attractive carpet colors and two metal colors.

Midwest's Single-Height Portable Stage and Seated Riser Unit is easy to set up and take down for all of your school's performances. A heavy-gauge steel frame supports the solid plywood deck that stands up to years of heavy use. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Supports 200 pounds per square foot and folds to less than two inches high for storage and transport. Choose from two metal colors.

Adjust Midwest's Dual-Height Portable Stage & Seated Riser Unit from two different heights in a snap. A heavy-gauge steel frame supports the solid plywood deck with your choice of hardwood, polypropylene or carpet surface. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Folds to less than 2" high for storage and transportation. Choose from two metal colors.

Midwest's Single-Height Portable Stage and Seated Riser Unit is easy to set up and take down for all of your school's performances. A heavy-gauge steel frame supports the solid plywood deck that stands up to years of heavy use. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Supports 200 pounds per square foot and folds to less than two inches high for storage and transport. Choose from six attractive carpet colors and two metal colors.

Adjust Midwest's Dual-Height Portable Stage & Seated Riser Unit from two different heights in a snap. A heavy-gauge steel frame supports the solid plywood deck with your choice of hardwood, polypropylene or carpet surface. Drop-in couplings let you quickly connect multiple same-sized units when setting up a custom stage. You can also connect units of different heights to build a custom riser. Folds to less than 2" high for storage and transportation. Choose from two metal colors.

NEW Unopened Metra Turbowire Cable Systems Auto Stereo Radio Installation system Metra 80-DISPLAY Discontinued part Installerworks www.metraonline.co m 1-800-253-TECH Daniel 603-878-9819 (call for alternative payments accepted) Greenville NH 03048 Local pick up and combined shipping OK Read description carefully Location Gray Bin #7

Midwest's TranFold Square Portable Stage and Seated Riser Units come in 4' wide x 4' long sections that are easy to handle, store and move. Use several square units together, or combine with Midwest TransFold arc and triangle units to create unique stage sets. Comes with built-in wheels on two legs. Once the stages are in place, the wheels automatically lift from the floor. Legs are made of durable, 14-gauge steel and stay steady with locking steel braces. This dual-height stage adjusts 8", so you can attach it to 16" high or 24" high stages. Adjustable stages come with clevis pins and tightening knobs so no tools are needed. Couplings rotate out of the way and won't break off during storage. Choose from six attractive carpet colors.

Midwest TransFold Triangle Portable Stage and Seated Riser Unit allows you to place your performers in unique arrangements. Each unit comes with couplings that securely connect the unit to other Midwest TransFold stages without tools. The couplings lock into place and rotate out of the way when not being used. Legs are made of durable, 14-gauge steel and stay steady with locking steel braces. Choose from six carpet colors. Note: Triangular stage units over eight inches in height should not be used by themselves. Each side needs to be secured to a rectangular or square TransFold stage.

Midwest's TranFold Square Portable Stage and Seated Riser Units come in 4' wide x 4' long sections that are easy to handle, store and move. Use several square units together, or combine with Midwest TransFold arc and triangle units to create unique stage sets. Comes with built-in wheels on two legs. Once the stages are in place, the wheels automatically lift from the floor. Legs are made of durable, 14-gauge steel and stay steady with locking steel braces. This dual-height stage adjusts 8", so you can attach it to 16" high or 24" high stages. Adjustable stages come with clevis pins and tightening knobs so no tools are needed. Couplings rotate out of the way and won't break off during storage. Choose from two polypropylene colors.

Midwest TransFold Triangle Portable Stage and Seated Riser Unit allows you to place your performers in unique arrangements. Each unit comes with couplings that securely connect the unit to other Midwest TransFold stages without tools. The couplings lock into place and rotate out of the way when not being used. Legs are made of durable, 14-gauge steel and stay steady with locking steel braces. Note: Triangular stage units over eight inches in height should not be used by themselves. Each side needs to be secured to a rectangular or square TransFold stage.

Midwest TransFold Triangle Portable Stage and Seated Riser Unit allows you to place your performers in unique arrangements. Each unit comes with couplings that securely connect the unit to other Midwest TransFold stages without tools. The couplings lock into place and rotate out of the way when not being used. Legs are made of durable, 14-gauge steel and stay steady with locking steel braces. Choose from six carpet colors. Note: Triangular stage units over eight inches in height should not be used by themselves. Each side needs to be secured to a rectangular or square TransFold stage.

MICRO 850 – Microcurrent TENSElectrodes: 2” x 2”, 4/pkgChannels: Dual, isolated between channelsDimension s: 3 ½”H x 2 ¼”W x 1”DWeight: 5ozPower Source: 9V batteryOutput waveform: Square pulses adjustable at 0.3Hz, 8Hz and 80Hz with changing waveform polarity at intervals of 1 secondOutput voltage: 12 VoltsFrequency: 0.3, 8, and 80 HzTimer: 10, 20 & 40 minutesWarranty: 1 year on unit, 90 days on lead wires*This item must be ordered by a licensed healthcare professional.

3M X80 and HSC 75/80 and CM70/80 and SRCX90w A minimum of $400 of 3M products must be ordered The 3M model X80 digital projector is the ideal projector for medium to larger size rooms and auditoriums. It is also available with 2 different lens options: you can choose a long throw lens or a short throw lens depending upon your needs. Featuring 4500 ANSI lumens and crystal clear XGA resolution, the X80 out preforms nearly everything currently available. Together with the X80, you can rest assured that your presentation will not only look professional, but also be completely engaging. For ease of use, the X80 can be controlled from anywhere in the room using the included remote control. For additional protection, be sure to purchase the additonal 3-year warranty. Also available, carry cases and a ceiling mount. Features: - Electronic lens shift - Integrated networking - 4500 Lumens ANSI - Recommended for medium to larger sized rooms and auditoriums - Fully functional remote control - HDTV ready - Available in 3 lens options: standard, long throw lens and short throw lens Specifications: - XGA resolution, 4500 ANSI lumens - 17 lbs - Comes with a standard 3-year warranty - 5.9 " H x 16.5 " W x 13.2 " D 3M X80 Digital Projection Details Optional Carry Cases: When you spend a lot of time on the road or ship your presentation materials ahead of you, the ATA hard shipping case is the answer for you. It will protect 3M models X75 and X80. These units are an investment and you want to be sure that your projector arrives in working order when it arrives at your destination. The 3M soft side rolling case for projector models X80 and X90w is ideal for the professional on-the-go. Because the bag is on wheels, it takes a tremendous burden off of. Perfect for use when traveling by air, simply take the projector as a carry-on and be sure it is safe. Warranty Features: - 3-year coverage on parts & labor - 3-day in shop repair time - 2-way paid shipping - 1 free lamp during the warranty period - Free loaner unit while your unit is being repaired

MICRO 850 – Microcurrent TENSElectrodes: 2” x 2”, 4/pkgChannels: Dual, isolated between channelsDimension s: 3 ½”H x 2 ¼”W x 1”DWeight: 5ozPower Source: 9V batteryOutput waveform: Square pulses adjustable at 0.3Hz, 8Hz and 80Hz with changing waveform polarity at intervals of 1 secondOutput voltage: 12 VoltsFrequency: 0.3, 8, and 80 HzTimer: 10, 20 & 40 minutesWarranty: 1 year on unit, 90 days on lead wires*This item must be ordered by a licensed healthcare professional.

LB White Premier - 80N Premier 80,000, NG The Premier-80N Unit Heater is perfect for large construction applications that require directed heat as well as small, hard-to-reach areas. The Premier 80N offers the ultimate in portable ducted construction heating with its light weight design and easy-grip handles. All L.B. White Premier Unit Heaters arrive ready to use and are extremely easy to operate. All models include Premier's compact thermostat which provides effective temperature management. Premier's Unit Heaters are equipped with an array of safety features for construction heating. Premier Unit Construction Heaters from L.B. White offer far reaching, highly efficient heating and air circulation for a wide range of construction environments. Features: -Tri-shield finish that is durable and weather resistant -Versatile indoor or outdoor placement -Thermostat - Weatherproof with 20'cord -Air flow safety devices -Fully enclosed electronics -Quiet operation for low noise environments -Totally enclosed flame -Gas Pressure Regulator -CSA U.S./Canadian Certified Specifications: -Max Input/Output: 80,000 BTUH -Heated Air Output: 450 CFM -Fuel Consumption: Natural Gas, 80 cu.ft./hr -Ignition Type: Direct Spark -Inlet Gas Pressure:Natural Gas min./max. (in W.C.) 7.0/13.5 -Gas Pressure Regulator ( with POL) -Electrical Supply: 115Volts/60HZ/1Ph ase -Amps: Starting/ Cont. Oper. 5.0/1.5 -15' Gas Hose -Ducting Optional -Weight: 88 lbs -Overall Dimensions: 23" H x 19" W x 34" D Duct, Gray,12 ft (12") w/tabs-Premier 80/170 Warranty -12 Month Premier- 80N_Owners_Manual

LB White Premier - 80 Premier 80,000 BTUH, LPG The Premier-80 Unit Heater is perfect for large construction applications that require directed heat as well as small, hard-to-reach areas. The Premier 80 offers the ultimate in portable ducted construction heating with its light weight design and easy-grip handles. All L.B. White Premier Unit Heaters arrive ready to use and are extremely easy to operate. All models include Premier's compact thermostat which provides effective temperature management. Premier's Unit Heaters are equipped with an array of safety features for construction heating. Premier Unit Construction Heaters from L.B. White offer far reaching, highly efficient heating and air circulation for a wide range of construction environments. Features: -Tri-shield finish that is durable and weather resistant -Versatile indoor or outdoor placement -Thermostat - Weatherproof with 20'cord -Air flow safety devices -Fully enclosed electronics -Quiet operation for low noise environments -Totally enclosed flame -Gas Pressure Regulator -CSA U.S./Canadian Certified Specifications: -Max Input/Output: 80,000 BTUH -Heated Air Output: 450 CFM -Fuel Consumption: Liquid Propane Gas, 3.7 lbs/hr -Ignition Type: Direct Spark -Inlet Gas Pressure: Propane min./max. in W.C. 11.0/13.5 -Gas Pressure Regulator with POL -Electrical Supply: 115Volts/60HZ/1Ph ase -Amps: Starting/ Cont. Oper. 5.0/1.5 -15' Gas Hose -Ducting Optional -Weight: 88 lbs -Overall Dimensions: 23" H x 19" W x 34" D Duct, Gray,12 ft (12") w/tabs-Premier 80/170 Warranty -12 Month Premier- 80_Owners_Manual

Deluxe TENS Century 2100A three mode TENS unit with a timer. In Burst mode, the TENS unit produces a series of seven quick pulses followed by a rest. The cycle repeats itself twice every second. In Modulation mode, the TENS unit automatically varies the amplitude of the pulse every four seconds. This is a dual channel unit, which allows you to use up to four electrodes at a time (two electrodes per channel). The TENS unit is portable and may be clipped to a belt, shirt pocket, bra or other clothing. Features:• Electrodes: 2" x 2", 4/pkg • Channel: Dual, isolated between channels • Dimensions: 1" x 2.5" x 3.75"• Power Source: 9V battery• Weight: 4.6 oz (includes battery)• Battery Life: 70 hours with average use• Wave Form: Modified square wave with zero net direct current (DC) component• Pulse Amplitude: 0 - 80 mA each channel, adjustable (500 ohm load)• Pulse Frequency: 2 - 150 Hz, adjustable• Pulse Width: 60 - 250 microseconds, adjustable• Modulation Mode: Pulse width is automatically varied in a cycle pattern over an interval of nominally 4.0 seconds• Burst Mode: 7 pulses per burst, 2 bursts per second, 100 Hz internal frequency of burst• Maximum Charge: 20 micro coulombs per pulse• Timer: 30, 60 minutes, continuous Includes:• One pack of 4 electrodes • 9V Battery • Instruction manual • Lead wires • Hard shell case Warranty:• 1 year on unit*This item must be ordered by a licensed healthcare professional.

Deluxe TENS Century 2100A three mode TENS unit with a timer. In Burst mode, the TENS unit produces a series of seven quick pulses followed by a rest. The cycle repeats itself twice every second. In Modulation mode, the TENS unit automatically varies the amplitude of the pulse every four seconds. This is a dual channel unit, which allows you to use up to four electrodes at a time (two electrodes per channel). The TENS unit is portable and may be clipped to a belt, shirt pocket, bra or other clothing. Features:• Electrodes: 2" x 2", 4/pkg • Channel: Dual, isolated between channels • Dimensions: 1" x 2.5" x 3.75"• Power Source: 9V battery• Weight: 4.6 oz (includes battery)• Battery Life: 70 hours with average use• Wave Form: Modified square wave with zero net direct current (DC) component• Pulse Amplitude: 0 - 80 mA each channel, adjustable (500 ohm load)• Pulse Frequency: 2 - 150 Hz, adjustable• Pulse Width: 60 - 250 microseconds, adjustable• Modulation Mode: Pulse width is automatically varied in a cycle pattern over an interval of nominally 4.0 seconds• Burst Mode: 7 pulses per burst, 2 bursts per second, 100 Hz internal frequency of burst• Maximum Charge: 20 micro coulombs per pulse• Timer: 30, 60 minutes, continuous Includes:• One pack of 4 electrodes • 9V Battery • Instruction manual • Lead wires • Hard shell case Warranty:• 1 year on unit*This item must be ordered by a licensed healthcare professional.