> ide to sata

This SATA to Slim Optical IDE Drive Adapter lets you connect any slimline IDE-based optical drive to a computer through a Serial ATA port.Fully compatible with all ATAPI ODDs, the adapter features a 7-pin SATA data connector for connection to the ...

This SATA to Slim Optical IDE Drive Adapter lets you connect any slimline IDE-based optical drive to a computer through a Serial ATA port.Fully compatible with all ATAPI ODDs, the adapter features a 7-pin SATA data connector for connection to the ...

The USB 2.0 to SATA and IDE drive adapter turns any SATA or IDE hard drive into a convenient external device. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The high-speed USB 2.0 interface provides for easy installation with its plug and play design.

The USB 2.0 to SATA/IDE 5 Component Cable is one adapter arround your PC or laptop. The USB 2.0 to SATA and IDE 2.5"/3.5" Drive Adapter turns any SATA or IDE hard drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives.

aerocooler Store Model OK250AU2S-K Size 2.5" IDE/SATA Hdd Enclosure Material Aluminum Internal Interface SATA IDE External Interface USB 2.0 eSATA Features Ideal for 2.5"IDE and SATA HDD.Fanless design.One USB 2.0 port, one eSATA port.Converts 2.5" IDE/SATA hard disk drives into Hi-speed USB 2.0 or SATA to eSATA external hard drives.Supports all 2.5" IDE/SATA hard disk drives of any capacity.Hi-speed USB 2.0 transfer rates up to 480M bits/sec.SATA transfer rates up to 1.5G bits/sec or 3.0G bit

This adapter provides bi-directional connections between all your disk drives with SATA or 40 pin IDE connection Does it all: SATA drives to IDE converter, or IDE drives to SATA host converter Combination are endless, and that's all you will need to get your data transfer between your drives collection Easy to install, no driver needed LED power indicator SATA 1.0 Specification compliant Automatic Serial ATA 1.5 Gbps speed negotiation ATA / ATAPI PIO mode 0 to 4 ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150 MB/s Support Serial ATA hot-plug Ultra low power consumption Work for both AC and DC couple between the transmitter and receiver Supports Partial / Slumber power management Slave Support Package includes: Parallel and SATA Bi-Directional Converter SATA cable Molex Power cable for IDE drives Manufacturer: SYBA OEM Part Number: SY-BIR-IDESA UPC Code: 893049000472

The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. � SATA, 3.5� IDE, 5.25� IDE, and 2.5� IDE drives.

The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. � SATA, 3.5� IDE, 5.25� IDE, and 2.5� IDE drives.

This IDE SATA Converter compliant with SATA specification, the SATA to IDE Hard Drive Adapter has a transfer rate of 3.0Gb/s. Unlike the traditional IDE interface connected by Parallel ATA ware, with Serial ATA interface.

This IDE SATA Adapter compliant with SATA specification, the SATA to IDE Hard Drive Adapter has a transfer rate of 3.0Gb/s. Unlike the traditional IDE interface connected by Parallel ATA ware, with Serial ATA interface.

Allows individual or simultaneous connection to either a serial ATA or IDE driveUSB 2.0 and SATA 1.0a compliantSupports plug-and-play and 2.5" or 3.5" IDE drives Includes 1-year warranty, AC/DC power adapter, serial ATA data cable, HDD power cable and 2.5" to 3.

This PATA to SATA adapter allows you to use your SATA drive on an older computher which without SATA ports Plug and Play, No drivers needed Serial ATA (SATA) compliant with Serial ATA 1.0 Parallel ATA (PATA) Ultra ATA / 133 Parallel Interface 48 bit sector addressing Connectors: SATA: Signal + Power Female PATA: IDE 2 x 20 pin male connector with molex power connector Master Slave device switchable: Supports using 2 adapters on the same ATA / IDE channel Supports: Windows 98 / NT 4.0 / 2000 / ME / XP, Linus Manufacturer: SYBA OEM Part Number: SY-IDE-SATAHD UPC Code: 810154015122

This USB 2.0 to IDE or SATA Adapter Cable allows you to copy, backup, or transfer large amounts of data from one drive to another, while taking advantage of convenient plug and play functionality.A convenient solution for testing USB or SATA drives ...

The Masscool SATA/IDE adapter gives you the flexibility of connecting almost any type of drive to your computer via a PCI slot.

This USB 2.0 to IDE or SATA Adapter Cable allows you to copy, backup, or transfer large amounts of data from one drive to another, while taking advantage of convenient plug and play functionality.A convenient solution for testing USB or SATA drives ...

PPA USB 2.0 3-in-1 Drive Adaptor Kit SATA/PATA (ATAPI/IDE)Mass Storage Made Easy! Instantly convert your internal SATA or IDE hard drive into an external Mass Storage Device with the revolutionary newPPA idotconnect 3 in 1 USB 2.0 SATA / PATA (ATAPI/IDE) Adaptor Kit. Ideal for large file transfer, backup or archiving, this multi-purpose adaptor quickly and conveniently converts your internal SATAor IDE hard drive to accommodate today s ever-increasing storage needs. Eliminating the need for confusing jumper changes, the High Speed USB 2.0 interface provides Plug n Play functions for hassle-free installation and use, and is also fully compatible with existing 5.25 devices such as: ATAPI CD-Rom, DVD, CDRW, etc. Let the PPA 3 in 1 Adaptor Kit help you take control and turn your PC into a personal storage powerhouse! Features:* Supports ATA / ATAPI / SATA interface storage device* Supports large capacity hard drive up to 1 TB* Works with 2.5 / 3.5 IDE or SATA internal Hard Drive* Works with 5.25 internal CDR/W, CD-ROM, and DVD RW etc?. .* Data transfer rate up to 480 Mbps for USB 2.0 port* Data transfer ratefor SATA device is up to 3 GBps* Plug n Play* No jumper pin or ID settings required* USB 2.0 downward compatible* External power adaptorfor IDE / ATAPI / SATA devicesSpecificat ions:USB 2.0 to IDE and SATA BridgeUSB 2.0 Interface to PCOne 4-Pin power connector for IDE deviceOne DC jack for external power adapterOne SATA connector (with power connector)System Requirements: Windows ME / 2000 / XP / VistaMac O/S 10 or higherOne available USB 1.1 or 2.0 PortBox Contents:One 3 in 1 USB 2.0 AdaptorOne External Power SupplyOne Power Cord

The Masscool SATA/IDE adapter gives you the flexibility of connecting almost any type of drive to your computer via a PCI slot.

Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive Connect your SATA / IDE device to your computer through a USB port Compliant with USB 1.1 and 2.0 standards USB 2.0 interface for 480 Mbps high speed data transfer Supports SATA Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices Plug-n-play AC power can be used world widely with input voltage AC 90v - 264v Supports Windows ME/2000/XP/Vista and Mac OS Package Includes USB to IDE / SATA cable adapter SATA Data cable AC adapter AC to IDE power converter IDE to SATA power cable Suggested Applications: 2.5" IDE Hard Disk / 3.5" IDE Hard Disk / SATA Hard Disk / CD/CD-RW ROM / DVD/DVD-RW ROM, etc.

SYBA SY-VIA-150R SATA/IDE combo software Raid controller card with raid 01 0+1 and jbod 2x SATA Ports and 1x IDE Port w/via vt6421a chipset

Support IDE HDD up to 1000GB Support SATA HDD up to 2000GB(2TB) Allows device hot-swapping(Plug and Play) Fitting for 3.5" SATA150/300 Hard Drive Work with PC and Mac

The TSE-IS401 USB 2.0 to IDE/SATA Storage Enclosure from TRENDnet allows users to use IDE or SATA hard drives over a USB 2.0 connection. It works with most 3.5” IDE and SATA I and II hard drives. This device provides a simple, yet powerful data transfer and backup solution. With all these features and more, it is the one you are looking for.

Upgrade your system by expanding two extra internal Serial ATA (SATA) ports, 1 internal Parallel ATA port with this Plug and Play PCI controller card Supports two SATA + two PATA hard drives Only SATA supports RAID Supports ATA 133 high performance hard disk drives Supports hard disk drives larger than 137 GB (48-bits LBA) Supports Ultra DMA mode 6 / 5 / 4 / 3 / 2 / 1 / 0, DMA mode 2 / 1 / 0, and PIO mode 4 / 3 / 2 / 1 / 0 Supports PCI Plug and Play. PCI interrupt sharing and coexists with main board IDE controller Supports IDE bus master operation Supports RAID 0 / 1 / 0+1 and JBOD 4 KB to 64 KB striping block size support Bootable disk or disk array support Windows-based RAID configure and management software tool Supports hot-swap failed disk drive in RAID 1 array Mirroring automatic background rebuilds support ATA SMART function support Package includes PCI SATA / IDE Combo Controller Card SATA cable Driver CD User Manual Supports Windows 98 / ME / NT 4.0 / 2000 / XP Manufacturer Part Number: SYBA SY-VIA-150R

The USB to SATA/IDE Kit allows you to connect SATA or IDE devices to your computer via USB port, a very useful tool for data transfer, backup and cloning. The hi-speed USB interface provides an easy plug-and-play installation. It supports all SATA / IDE devices such as CD ROM, DVD ROM, CD-RW, DVD RW and so on.

Converts IDE Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD±RW, etc..) to Serial ATA Connection 1 IDE Input Port and 1 SATA Output Port Supports ATAPI, ATA/133, ATA/100, ATA/66 and IDE Devices -- Compliant with ATA Specifications -- Compliant with Serial ATA Gen 1.0

Tripp Lites USB 2.0 to SATA / IDE Adapter allows individual or simultaneous connection to either a Serial ATA or IDE drive (2.5" or 3.5"). You can also transfer data between a SATA and an IDE drive over the adapter. Configure hard drives without ...

Tripp Lites USB 2.0 to SATA / IDE Adapter allows individual or simultaneous connection to either a Serial ATA or IDE drive (2.5" or 3.5"). You can also transfer data between a SATA and an IDE drive over the adapter. Configure hard drives without ...

USB 2.0Supports Standard 3.5" Serial ATA or IDE Hard DrivesUltra Light Aluminum CaseEasy access on PC or NotebookEquipped with LED indicates Power and Action status.Supports Wakeup abilitySupports 480Mbps high-speed data transfersSupports 3.5-inch IDE hard disk drivesSupport 3.5" Serial ATA (SATA) Hard Disk DrivesHot- swappableBuilt in Cooling Fan to reduce Heat.

Specifications: Type: SATA / IDE Internal Connectors: 2 x internal SATA Ports + 1 x internal IDE Port Interface: PCI Express Features: Chipset: JMicron 363 Compliant with Serial ATA AHCI(Advanced Host controller Interface) Spec. Reversion 1.0 Compliant wth Bus Master Programming interface for IDE ATA Controllers Revision 1.0 Compliant wth PCI express Base Spec Revision 1.0a Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1 Compliant with Gen2i and Gen2m Serial SATAII: Electrical Spec. Revision 1.0 Integrated 1-Lane PCI Express PHY and 2-port SATA II PHY Integrated two PLL for both PCI Express bus and SATA II interface Output swing control and Automatic impedance calibration for both PCI express and SATA II Supports up to 64K Byte external Flash for BIOS expansion Supports a a slave SMBus interface(follow System Management Bus Specification Revision 1.1) Internal native interface multiplexed to 2-port SATA II and 1-port PATA Supports ATA 133 high performance hard disk drives Supports PCI Plug and Play. PCI interrupt sharing and coexists with main board IDE controller Operating Systems Supported: Windows 98, Windows Me, NT 4.0, Windows 2000, Windows XP Package Includes: SY-JM363-2S1P User Manual Driver Disk IDE / PATA Cable SATA Cable

Whether it is a hard drive, optical drive, SSD, IDE/SATA or a memory card, this adapter does it all.

Whether it is a hard drive, optical drive, SSD, IDE/SATA or a memory card, this adapter does it all.

This PATA to SATA adapter allows you to use your SATA drive on an older computher which without SATA ports Plug and Play, No drivers needed Serial ATA (SATA) compliant with Serial ATA 1.0 Parallel ATA (PATA) Ultra ATA / 133 Parallel Interface 48 bit sector addressing Connectors: SATA: Signal + Power Female PATA: IDE 2 x 20 pin male connector with molex power connector Master Slave device switchable: Supports using 2 adapters on the same ATA / IDE channel Supports: Windows 98 / NT 4.0 / 2000 / ME / XP, Linus Manufacturer: SYBA OEM Part Number: SY-IDE-SATAHD UPC Code: 810154015122

The adapter supports all existing IDE/ATAPI/SATA devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives.

The USB 2.0 to SATA/IDE combo adapter allows users to use IDE or SATA hard drives over a USB 2.0 connection.

Specifications: Type: SATA / IDE Internal Connectors: 2 x internal SATA Ports + 1 x internal IDE Port Interface: PCI Express Features: Chipset: JMicron 363 Compliant with Serial ATA AHCI(Advanced Host controller Interface) Spec. Reversion 1.0 Compliant wth Bus Master Programming interface for IDE ATA Controllers Revision 1.0 Compliant wth PCI express Base Spec Revision 1.0a Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1 Compliant with Gen2i and Gen2m Serial SATAII: Electrical Spec. Revision 1.0 Integrated 1-Lane PCI Express PHY and 2-port SATA II PHY Integrated two PLL for both PCI Express bus and SATA II interface Output swing control and Automatic impedance calibration for both PCI express and SATA II Supports up to 64K Byte external Flash for BIOS expansion Supports a a slave SMBus interface(follow System Management Bus Specification Revision 1.1) Internal native interface multiplexed to 2-port SATA II and 1-port PATA Supports ATA 133 high performance hard disk drives Supports PCI Plug and Play. PCI interrupt sharing and coexists with main board IDE controller Operating Systems Supported: Windows 98, Windows Me, NT 4.0, Windows 2000, Windows XP Package Includes: SY-JM363-2S1P User Manual Driver Disk IDE / PATA Cable SATA Cable

This ULTRA Adapter is the perfect solution for adding 3.5 SATA drives to motherboards lacking available SATA connectivity.

This ULTRA Adapter is the perfect solution for adding 3.5 SATA drives to motherboards lacking available SATA connectivity.

The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. SATA, 3.5" IDE, 5.25" IDE, and 2.5" IDE drives are all supported and can be easily hot-swapped to your system. The included external power adapter will allow you to power your drives outside your system giving you the ability to quickly add or swap between drives without opening your case. The SATA/IDE-USB adapter incorporates 3 interfaces to one USB adapters.