> matrice video rs232

Gefen EXT-VGARS232-141 Extends any VGA or component HD display plus RS-232 up to 330 ft away with the help of the VGA RS-232 Extender by Gefen. This unit connects to your source using the supplied VGA and RS-232 cables. The receiver unit connects to your display and your serial device - up to 330 feet away. Finally, connect the sender and the receiver to each other using a single CAT5 cable, and you're good to go. Features: -Extends any VGA or high definition component display and RS-232 device up to 330 feet -Trim pot and dip switches for fine video equalization -Perfect for digital signage applications -Supports resolutions up to 1080p, 2K and 1920 x 1200 -Includes VGA RS-232 Extender S, VGA RS232 Extender R, 6 ft VGA cable, 6 ft Serial cable and 2 5V external power supplies Specifications: -Video amplifier bandwidth: 350 MHz -Input video signal: 1.2 Volts -Horizontal frequency range: 15 - 70 KHz -Vertical frequency range: 30 - 170 Hz -Video in: HD-15 male -Video out: HD-15 female -RS232 input connector: DB-9 female -RS232 output connector: DB-9 male -Link connector: RJ-45 shielded -Conforms to RS-232C standards -Power supply: 5V DC -Power consumption: 5 Watts (max) -Dimensions: 1.13" H x 4" W x 3" D

Comprehensive CVG-808XL The Comprehensive CVG-808XL is a high resolution, 200 MHz bandwidth, 8x8 video/stereo audio matrix switcher. The CVG-808XL provides vertical interval, glitch free switching when used with genlocked sources. The CVG-808XL can switch stereo audio in audio-follow-video mode or separately )breakaway). The CVG-808XL has manual, RS-232 and RS-485 controls, and may be simultaneously controlled in all modes. The unit has non-volatile memory built-in and it "remembers" the last setting. Several pre-sets may also be stored in the machine for quick retrieval. The CVG-808XL has a TAKE control button, and when it is activated, you may preset the machine and switch all crosspoints by one touch of this button. The unit has an external Sync/Genlock input as well and may be programmed to use this input or source number one. Windows software is included. This unit is covered under a 3 year warranty. Features: -8x8 matrix switching -200 MHz bandwidth -Stereo audio follow video or breakaway audio -Programmable memory -Looping inputs -Vertical interval seamless switching -Front panel LED display -RS-232 and RS-485 -Rackmountable -CE approved -3 year warranty Specifications: Inputs -8 composite video, 1Vpp/75 ohm on BNCs. 1 sync/video genlock 1Vpp/75 ohm with sync select switch. 8 audio stereo, +4dBm/33K ohm on RCAs Outputs -8 composite video, 1Vpp/75 ohm on BNCs. 8 audio stereo, +4dBm/50ohm (24 Vpp max.) on RCAs -Video bandwidth: Exceeding 200 MHz -Audio bandwidth: Exceeding 100 kHz -Video crosstalk: <50dB @ 5 MHz -Non linearity: <0.1% -Video S/N: 74 dB -Audio S/N: 88 dB unweighted, (1Vpp) -Control: Manual, RS-232 or RS-485 -Diff. gain: 0.05% -Audio THD: 0.016% (1V, 1kHz) -Diff. phase: 0.03 Deg -Switching: Vertical interval -K-Factor: <0.05% -Dimensions: 2U(H) x 19"W x 7"D, rack mountable -Power source: 115VAC, U.S.A., 11 VA -Weight: 7.8 lbs approx. -Warranty: 3 years Comprehensive offers a lifetime warranty on all products

Comprehensive VS-4X4YCXL The Comprehensive CVG-4X4S is a 4x4 Y/C-Video/Audio stereo matrix switcher designed for studio and other demanding applications. The CVG-4X4S may also be used as one 1x4 or two 2x2 Y/C-Video-Audio DAs or any other combination as well. The CVG-4X4S switches during vertical interval for smooth transitions between genlocked sources. The machine is microprocessor and RS-232 controlled, software included, and is operated by a keypad on the front panel. Large illuminated display LEDs shows the connection status of the machine at any given moment. This unit is covered under a 3 year warranty. Features: -4x4 matrix switching -Switch composite or S-Video -50 MHz bandwidth -Stereo audio follow video -Vertical interval seamless switching -Front panel LED display -RS-232 -Metal enclosure -Rackmountable -CE approved -3 year warranty Specifications: Inputs -4 video, 4Y/C - Y=1Vpp/75 ohm, C=0.3Vpp/75 ohm. 4 audio stereo 1Vpp/100 ohm on RCAs -Video bandwidth: 50 MHz -3dB -Diff. gain: 0.15% -Diff. phase: 0.1 Deg -Audio bandwidth: 10-100,000 Hz -Video S/N ratio: >65 dB -Audio S/N ratio: >75 dB -Audio THD: <0.1% -Audio crosstalk: 53 dB -Video crosstalk: 47dB Luma -Dimensions: 19" 1U rack mountable -Power source: 115VAC U.S.A. -Weight: 6.4 lbs -Warranty: 3 years Comprehensive offers a lifetime warranty on all products

Comprehensive CVG-606XL The Comprehensive CVG-606XL is a broadcast quality, high resolution 6x6 video and stereo audio matrix switcher. Over 200 MHz video bandwidth allows the unit to be used in the most demanding professional applications. Vertical interval switching provides glitch free switching between genlocked sources. The CVG-606XL can switch stereo audio signals in audio-follow-video mode or separately (breakaway). The CVG-606XL has manual, RS-232 and RS-485 controls, and may be simultaneously controlled in all modes. The CVG-606XL has non-volatile memory built-in and it "remembers" the last setting. Several pre-sets may also be stored in the machine for quick retrieval. The CVG-606XL has a take control button, and when it is activated, you may preset the machine and switch all crosspoints by one touch of this button. The machine has an external Sync/Genlock input as well and may be programmed to use this input or source number one. CVG-Windows95/NT control software is provided free with the machine. This unit is covered under a 3 year warranty. Features: -6x6 matrix switching -200 MHz bandwidth -Stereo audio follow video or breakaway audio -Programmable memory -Vertical interval seamless switching -Front panel LED display -RS-232 -Metal enclosure -Rackmountable -CE approved -3 year warranty Specifications: Inputs -6 composite video, 1Vpp/75 ohm on BNCs. 1 sync/video genlock 1Vpp/75 ohm with sync select switch. 6 audio stereo, + 4dBm/62K ohm on RCAs Outputs -6 composite video, 1Vpp/75 ohm on BNCs. 6 audio stereo, +4dBm/50 ohm (27 Vpp max.) on RCAs -Video bandwidth: Exceeding 200 MHz -Audio bandwidth: Exceeding 100 kHz -Video crosstalk: <50dB @ 5MHz -Non linearity: <0.1% -Video S/N: 74 dB -Audio S/N: 88 dB unweighted, (1Vpp) -Control: Manual, RS-232 or RS-485 -Diff. gain: 0.05% -Audio THD: 0.016% (1V, 1KHz) -Diff. phase: 0.03 Deg. -Switching: Vertical interval -K-Factor: <0.05% -Dimensions: 2U H x 19" W x 7" D, rack mountable -Power source: 115VAC, U.S.A., 11VA -Weight: 7.5 lbs approx. -Warranty: 3 years Comprehensive offers a lifetime warranty on all products

100% high quality! You can easily add RS232 serial to your notebook with this PCMCIA ExpressCard. Compliant with RS-232 serial interface. Data transfer rate of 921.6KB/s.

This tiny size modem allows extension of RS-232 serial interface over 4 wire (2 twisted pairs Cat3) copper lines, up to 10Km, operating as a self powered device without external power supply. An optional power adapter can be used also for broader coverage

This tiny size modem allows extension of RS-232 serial interface over 4 wire (2 twisted pairs Cat3) copper lines, up to 10Km, operating as a self powered device without external power supply. An optional power adapter can be used also for broader coverage

Cisco High Density RS-232 Splitter Cable, CAB-HD4-232MT Network Cable Type- Serial RS-232 cable Length- 10 ft Connector(s)- (1) DB-25 - male Connector(s) (Other Side)-(4) DB-25 - male Condition: New Warranty : 1 Year

Route high definition video in multiple resolutions up to 1080p plus multichannel digital audio from any of the four HDMI sources to the displays. Four outputs give you the choices of sending high definition audio and video signals up to four displays. Any four to any four matrix switching allows for maximum versatility for integrated systems. Eliminates the need to disconnect and reconnect sources to a display equipped with one input. It works with HD-DVD players TiVo systems HT PCs and satellite set top boxes that connect to an HDMI display. Every source is accessible at all times by any display by selecting it with an IR remote or through RS232 port.

- USGlobalSat bulkhead serial receiver with RS232 ~~~cable included- "Mini" external GPS ~~~receiver- IPX7 waterproof design- ~~~Designed for applications in need of a more ~~~permanent weatherproof mounting solution- ~~~Self- contained with an active patch antenna~~- Utilizes the latest 20 channel SiRF Star III high ~~~performance GPS chipset for accurate ositioning- Extended 15' cable allows for easy routing ~~~behind the headliner and side panels, terminating ~~~into a proprietary pin-out on a PS/2 connector- WAAS/EGNOS can be used in a wide variety ~~~of applications including commercial fleet/utility ~~~vehicles, police and fire trucks, boats and specialty ~~~equipmentUSGMR 350RS232

Comprehensive CVG-801XLM The CVG-801XLM is a high resolution vertical interval switcher with stereo audio. This unit provides glitch-free switching from eight video/stereo audio inputs to one output. However, the output has a built-in distribution amplifier function whereby it divides into three paralell video and audio outputs to simultaneously feed the same signal to three monitors, etc. At 400 Mhz video bandwidth, the CVG-801XLM is perfect for switching today's high resolution video sources. The switcher may be controlled in four ways: front panel buttons, RS-232, RS-485 or contact closure. Windows software included. The CVG-801XLM is also designed for easy expansion for larger switching systems such as combining two units to become and 16x1 as well as switching systems using other signals types. For example, two CVG-801XLM units can be linked together to become an 8x1 S-Video switcher. This unit is covered under a 3 year warranty. Features: -8x1 composite video switching -400 MHz bandwidth -Stereo audio follow video -Vertical interval seamless switching -Front panel LED display -Built in distribution amplifier -RS-232 and RS-485 -Metal enclosure -Rackmountable -CE approved -3 year warranty Specifications: Inputs -8 composite/single component video, 1Vpp/75 ohm, on BNCs. 8 audio-stereo, +4dBm, 10k ohm, on RCA connectors. 1 external sync input (or composite video) 1Vpp/75 ohm, on a BNC connector. RS-232 DB-9 control socket, RS-485 terminal block, DB-15 for remote connector Outputs -1x3 composite/single component video, 1Vpp/75 ohm on a BNC. 1x3 audio-stereo up to +28Vpp/50 ohm, (24dBm) on RCAs -Bandwidth (Video): 400 MHz -3dB (typical) -Bandwidth (Audio): 55 kHz, -0.1dB -Non linearity: Less than 0.1% -Audio THD+Noise: 0.02% -Diff. phase: 0.03 Deg -2nd harmonic: 77 dB -Audio S/N ratio: >90dB unweighted -K-Factor: <0.05% -Dimensions: 1U H x 19" W x 7" D, rack mountable -Power source: 115VAC U.S.A. -Weight: 6.9 lbs -Warranty: 3 years Comprehensive offers a lifetime warranty on all products

UIC P790 PIN PAD 3 TRACK MSR RS232 0-SAM SOCKETS RS232 CABLE POWER ADAPTER PRIVACY SHIELD BACKLIGHT LCD ROHS

Wonderful BAFO USB to RS232 Converter. The USB RS232 converter cable support RS-232 serial interface and remote wake-up and power management, with over 1 Mbps data transfer rate. This USB RS232 serial cable available USB port, and compatible with Windows 98/2000/ME/XP.

Bi-Phase/RS-232 Transceiver, 850 nm FOM, 230VAC, 50Hz The LTC 4651 Transceivers are designed especially for the transmission of Bi-Phase control code signals used in the Allegiant Series of switcher/controll ers, various DVRs, multiplexers, and other camera control systems. They are also compatible with Manchester code and standard RS-232 signals. These units operate in the 850 nm range and contain a removable screw terminal type connector that allows easy connection to the shielded twisted pair cable carrying the control signal. These units can also be used as an RS-232C transceiver that is compatible with EIA Standard RS-232C levels. The system is suitable for simplex asynchronous data transmissions using one fiber, or full duplex asynchronous data transmissions using two fibers up to 64 kbaud.