> pdr 140

View large flat panel displays from any angle with PDR-2540S PDR Reaction Dual Swing Arm Wall Mount from Chief®. This custom mounting solution swings out and extends over 37-inch from the wall while remaining low profile in the home position. It’s Q-Latch™ Mounting System uses a lockable latch to safely secure display to the mount. The built-in cable management channels inside the arms provide a clean installation. Equipped with wall protection rubber stops, this wall mount provides safe and convenient mounting solution.

This Lithium battery is compatible with the following Toshiba Digital Camera models: PDR-T20, PDR-T30, PDR-5300 . Specifications: Rechargeable Lithium-Ion battery. No memory effect. (Does not need to be fully discharged before recharging) Capacity : 900mAh. Net weight : 26g (Approx.) Dimension(mm) : 53.20 x 35.30 x 7.10 (Approx.) Type : Aftermarket. Color: Black. Best replacement for the original battery pack.

The textbook, PDR Drug Guide for Mental Health Professionals, by PDR Staff, available in Paperback. Published by: Thomson Healthcare. Edition: 2ND. ISBN10: 1563635119. ISBN13: 9781563635113. Ships directly from the vendor. Not a marketplace or backordered item. Our used books are hand inspected and in very good condition.

Model: AWM175 - Full Articulating Arm for displays ranging from 37 to 55 InchesDescription : All necessary parts are included, no adapters required Rated at 175 Lbs., Tested at over 800 Lbs. Fits Most Brands of Displays Can rotate a 55 inch flat panel TV up to 90 degrees Arm extends 27.5 Inches, swivels 170 degrees Tilts up and down 15 degrees Cable management included Anti-Creep tension adjustment Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty Powdercoating Easy Installation/Univ ersal Adaptability UltraSlim 4.4 Inches folded wall profile (Less than 4.5Ó thin profile when closed) Lifetime Warranty, VESA ready Manufactured in the USA

Model: AWM250 - Full Articulating Arm for displays ranging from 50 to 71 InchesDescription : All necessary parts are included, no adapters required Rated at 250 Lbs., Tested at over 1,000 Lbs. Fits Most Brands of Displays Can rotate a 60-plus inch flat panel TV up to 90 degrees Tilts up and down 15 degrees Arm extends 27 Inches, swivels 170 degrees UltraSlim 4.7 Inches folded wall profile Cable management included Anti-Creep tension adjustment Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty Powder coating Easy Installation/Univ ersal Adaptability Lifetime Warranty, VESA ready Manufactured in the USA

Model: SE14X6 - PDM Large Extension Arms (4 Pack)Universal extensions for PDR mounts (PDM Models ending in: THN, T, F) Description: Rated at 200 Lbs., tested at 4X rated weight Fits Most Brands of Displays Meets VESA Standards Designed for non-standard bolt-pattern displays Extends an additional 6 inches vertically and 14 inches horizontally from any PDR mount arms All hardware and instructions included Heavy-duty gauge metal construction (.187 inch thk) No assembly required Heavy Duty Powdercoating Easy Installation/Univ ersal Adaptability Lifetime Warranty Manufactured in the USA

Model: AWM125-110 - Full Articulating Arm for displays ranging from 35 to 45 InchesDescription : All necessary parts are included, no adapters required Rated at 125 Lbs., Tested at over 500 Lbs. Fits 35 to 45 Inch displays Can rotate a 36 flat panel TV up to 90 degrees Arm extends 21.6 Inches and swings 170 degrees Tilts up 5 degrees and down 15 degrees Fine horizontal adjustment feature Cable management included Anti-Creep tension adjustment Includes universal adapter plate 3.8 inch thin profile when closed Ultra slim profile Ultra slim profile Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty Powder coating Easy Installation/Univ ersal Adaptability Lifetime Warranty, VESA ready Manufactured in the USA

Model: AWM125-120 - Full Articulating Arm for displays ranging from 26 to 37 InchesDescription : All necessary parts are included, no adapters required Rated at 125 Lbs., Tested at over 500 Lbs. Fits 26 to 37 Inch displays Can rotate a 36 inch flat panel TV up to 90 degrees Tilts up 5 degrees and down 15 degrees Arm extends 21.6 Inches and swings 170 degrees Fine horizontal adjustment feature Cable management included Anti-Creep tension adjustment Includes universal adapter plate Ultra slim profile 3.8 inch thin profile when closed Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty Powder coating Easy Installation/Univ ersal Adaptability Lifetime Warranty Manufactured in the USA

Model: AWM125-VESA - Full Articulating Arm for displays ranging from 22 to 36 InchesDescription : Fits displays with a VESA 100 x 100, 100 x 200, & 200 x 200 pattern Rated at 125 Lbs., Tested at over 500 Lbs. Fits VESA 100 x 200 Hole Pattern Can rotate a 36 in flat panel TV up to 90 degrees Tilts up 5 degrees and down 15 degrees Fine horizontal adjustment feature Cable management included Anti-Creep tension adjustment Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty Powder coating Easy Installation/Univ ersal Adaptability Ultra slim profile (3.8 inch thin profile when closed) Arm extends 20.6 Inches and swings 170 degrees Lifetime Warranty, VESA ready Manufactured in the USA

Model: SWM050 - Full Swing Arm for displays up to 22 InchesDescription : Rated at 50 Lbs., tested at over 200 Lbs. Fits Most Brands of Displays Boxed Can rotate a 22 inch flat panel TV up to 90 degrees Arm extends 10.3 Inches and swings 170 degrees Tilts up 5 degrees and down 15 degrees Fine horizontal adjustment feature Integrated Cable Management Anti-Creep tension adjustment VESA 75/100 compatible Ultra slim profile (2.7 inch thin profile when closed) Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty Powder Coating Easy Installation/Univ ersal Adaptability Lifetime Warranty, VESA ready Manufactured in the USA

AC/DC Battery Charger for Fuji NP-80 Kodak KLIC-3000 Ricoh DB-20 DB-20L Sanyo UR-211 Toshiba PDR-BT1 PDR-BT2 PDR-BT2A Epson R-D1s R-D1 Fuji FinePix 4800 4800Z 4900 6800 6900 Zoom MX-1700 MX-2700 MX-2900 MX-4900 MX-6800 MX-6900 Kodak DC-4800 Ricoh Caplio RR1 RDC-i500 RDC-6000 RDC-7 Ricoh RDC-7S Toshiba PDR-5300 PDR-M5 PDR-M4 PDR-M70

PDR small extenders for mounting a VESA 400 x 800 mounting pattern

PDR PMSW50U Sidewinder Universal Projector Mount Features Roll and Pitch Micro Adjustability and can Hold 55lbs.

Books. PDR Drug Guide to Pediatric & Adolescent Mental Health

PDR PPKS40-1 PolePosition Projector Mount Kit Features Ultimate Accessibility and Easy Installation

Inwall box for lcd mount

Compatible with Toshiba PDR-T20, PDR-T30. Provides portable power. Simply plug the charger into a wall outlet and your battery will be fully charged. Comes with Cigarette Lighter Adaptor - Charge Battery in your car, truck, or van while on the go. Rapid charge battery. LED indicator shows charging status. IC chip inside prevents overcharging, short circuit and electronic shock. Auto switching power Voltage from 100V-240V AC fits anywhere in the world. Small, lightweight. Convenient for travelling because it features collapsible outlet prongs that fold in to the base of the charger. Specifications : Input voltage: AC 100V~240V, 50-60Hz. Output voltage: DC 8.4V, 600mA. Power Supply for Car : DC 12V.

Model: PDM110THN - Ultra thin fixed mount for displays ranging from 37 to 55 inchesDescription :ÊÊ UL Listed at 200 Lbs., tested at 4X rated weight Fits Most Brands of Displays Rugged heavy gauge steel construction No assembly required, all hardware and instructions included Heavy Duty Powdercoating Easy Installation/Univ ersal Adaptability Industry's lowest profile, less than 1 inch (Ultra-slim .93 inches) EZ adjust horizontal movement 1.5 and 3 inch alternate height adjustments Security locking bar Lifetime Warranty, VESA Ready Manufactured in the USA

Model: MDWM50 - VESA compliant Pivot/Tilt LCD mount for flat panel TV ranging from 7 to 22 inchesDescription : UL Listed at 20 Lbs., tested at 4X rated weight Fits Most Brands of Displays Fits displays with VESA 75/100 mounting patterns Kwik_release feature (Exclusive bayonet quick- disconnect) Rotates for portrait or landscape viewing Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty TCI Chrome Powdercoating Easy Installation/Univ ersal Adaptability Thin profile EZ Tilt and swivel Silver Chrome finish Lifetime Warranty, VESA ready Manufactured in the USA

Model: MDWM150 - Ultra thin fixed VESA-compliant LCD mount for flat panel TVs ranging from 7 to 22 inchesDescription : UL Listed at 20 Lbs., tested at 4X rated weight Fits Most Brands of Displays Fits displays with VESA 75/100 mounting patterns Ultra slim .5 inch profile Exclusive bayonet quick- disconnect Slip fit _ room to room portability Rugged heavy gauge steel construction Heavy Duty TCI Chrome Powdercoating Easy Installation/Univ ersal Adaptability No assembly required, all hardware included Silver Chrome finish Lifetime Warranty, VESA ready Manufactured in the USA

NOTE: Shipments to the United Kingdom, Hawaii, Puerto Rico, Alaska, APO addresses or PO Boxes may require different shipping costs. Please call us at 888-488-2635 for details.Model: UCMM50 Ê- Under cabinet LCD mount with quick bayonet_release feature for displays up to 20 inches. - Display easily extends down for viewing and folds up when not needed. - Arm extends from 4.75" to 6.75" from the mounting base to the first mounting hole of your TV - UL Listed at 20 Lbs., tested at 4X rated weight. - Fits displays with VESA 75/100 patterns. - Turns TV 360¡ for best viewing angle. -Ê EZ Tilts up to 100 Degrees, Rotares, 2" height adjustment from 6.8" to 8.8" -Ê Exclusive bayonet locking quick- disconnect. - Lifetime Warranty. - Manufactured in the USA. - Includes mounting screws set - Condition: Brand New

Model: PDM120THN - Ultra thin fixed mount for display sizes 22 to 36 inchesDescription : Rated at 200 Lbs., tested at 4X rated weight Fits Most Brands of Displays Rugged heavy gauge steel construction No assembly required. All mounting hardware & instruction included Heavy Duty Powdercoating Easy Installation/Univ ersal Adaptability Slim 15/16 Inch thin profile (Industry's lowest profile, less than 1 inch (Ultra-slim .93 Inches) EZ adjust vertical & horizontal movement 1.5 Inch and 3 Inch alternate height adjustments Exclusive gravity lock security features Lifetime Warranty, VESA Ready Manufactured in the USA

Model: UPM50 - Universal Projector Mount for flat ceilings, walls or vaulted ceilingsDescripti on: Mounts to flat ceilings, walls or vaulted ceilings UL Listed at 20 Lbs., tested at over 350 lbs. Fits Most Brands of Displays Adjustable from 2.5 to 12 inch drop Easy pitch & yaw adjustment with 360 degree rotation Simple lateral side-shift capabilities Exclusive bayonet-style quick disconnect Universal fit for projectors under 20 lbs. Rugged heavy gauge steel construction No assembly required, all hardware included Heavy Duty Powdercoating Easy Installation/Univ ersal Adaptability Lifetime Warranty Manufactured in the USA

Model: SE_100 - PDM Small Side Extenders for Mounting a VESA 400 X 800 Mounting Pattern (4 Pack)Universal extensions for PDR mounts (PDM models ending in: THN, T, F). Extends an additional 2 inches vertically and 4 inches horizontally from any PDR mount arms. Designed for 400mm X 800mm bolt-pattern displaysDescripti on: Rated at 200 Lbs., tested at 4X rated weight Fits Most Brands of Displays Meets VESA 400 x 800 Standards Heavy-duty gauge metal construction No assembly required. All hardware and instructions included Heavy Duty Powdercoating Easy Installation/Univ ersal Adaptability Lifetime Warranty Manufactured in the USA

Chief Manufacturing PDR View your new plasma or LCD display from any angle with the best mount that money can buy. The new PDR™ Dual Arm Plasma Wall Mount, which features greater range than anything else on the market, swings out and extends up to 36" (91.44 cm) from the wall, collapsing to only 2-7/8" (74 mm) when in home position! The PDR includes all of the standard features you can expect from a Chief mount, plus several new exclusive features developed specifically for the PDR plasma mount. Features: -Articulating arm allows for up to 90° of swivel (depending on size of screen) -Easy Installation - Wall bracket can be placed on wall using convenient mount guides -Gravity-Centered Tilt™ No tools necessary for position adjustments -Integrated Lateral Shift Up to 9" (229 mm) - 2" (51 mm) left/right of 16" (406 mm) stud system without disassembly -Built-In Cable Management Channels inside the arms provide a clean installation -Q-Latch™ Mounting System Used on all Chief Large Flat Panel Mounts, this system uses a lockable latch to safely secure display to the mount -Unmatched Extension, Remains Low-Profile in Home Position Extends 36" (91.44 cm) from the wall, only 2-7/8" (74 mm) deep when collapsed -Height Adjustment Post- installation height adjustment up to 3" (76 mm) for ultimate installation flexibility -Independently Adjustable Tension at Pivot Points Provides customized control -Rubber stops protect the wall when arms are collapsed -Mounts easily with centers on 16" studs. -Comes in a black or silver finish -Distance from wall: 2 7/8" -Max Extension from wall: 36" -Weight capacity: 200 lbs Click Here for a full list of supported monitors and the style adapter plate you should select. PDR Articulating Plasma Wall Mount Installation Instructions PDR Articulating Plasma Wall Mount Technical Data Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and manufactured at Chief's main headquarters in Minnesota. Most mounts will

Chief Manufacturing PDR View your new plasma or LCD display from any angle with the best mount that money can buy. The new PDR™ Dual Arm Plasma Wall Mount, which features greater range than anything else on the market, swings out and extends up to 36" (91.44 cm) from the wall, collapsing to only 2-7/8" (74 mm) when in home position! The PDR includes all of the standard features you can expect from a Chief mount, plus several new exclusive features developed specifically for the PDR plasma mount. Features: -Articulating arm allows for up to 90° of swivel (depending on size of screen) -Easy Installation - Wall bracket can be placed on wall using convenient mount guides -Gravity-Centered Tilt™ No tools necessary for position adjustments -Integrated Lateral Shift Up to 9" (229 mm) - 2" (51 mm) left/right of 16" (406 mm) stud system without disassembly -Built-In Cable Management Channels inside the arms provide a clean installation -Q-Latch™ Mounting System Used on all Chief Large Flat Panel Mounts, this system uses a lockable latch to safely secure display to the mount -Unmatched Extension, Remains Low-Profile in Home Position Extends 36" (91.44 cm) from the wall, only 2-7/8" (74 mm) deep when collapsed -Height Adjustment Post- installation height adjustment up to 3" (76 mm) for ultimate installation flexibility -Independently Adjustable Tension at Pivot Points Provides customized control -Rubber stops protect the wall when arms are collapsed -Mounts easily with centers on 16" studs. -Comes in a black or silver finish -Distance from wall: 2 7/8" -Max Extension from wall: 36" -Weight capacity: 200 lbs Click Here for a full list of supported monitors and the style adapter plate you should select. PDR Articulating Plasma Wall Mount Installation Instructions PDR Articulating Plasma Wall Mount Technical Data Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and manufactured at Chief's main headquarters in Minnesota. Most mounts will

Compatible with Toshiba PDR-M4, PDR-M5, PDR-M70. Provides portable power. Simply plug the charger into a wall outlet and your battery will be fully charged. Comes with Cigarette Lighter Adaptor - Charge Battery in your car, truck, or van while on the go. Rapid charge battery. LED indicator shows charging status. IC chip inside prevents overcharging, short circuit and electronic shock. Auto switching power Voltage from 100V-240V AC fits anywhere in the world. Small, lightweight. Convenient for travelling because it features collapsible outlet prongs that fold in to the base of the charger. Specifications : Input voltage: AC 100V~240V, 50-60Hz. Output voltage: DC 8.4V, 600mA. Power Supply for Car : DC 12V.

Shim-less design, easy install Flush mounting appearance for your AWM125 series articulating mount One piece face frame for clean aesthetic appearance 50 % Stronger Load Solution Mounts between standard 16" wood stud locations Knock out supplied with 4 locations 2 electrical boxes included (Carlon -B114R) 125 lb. load capacity Durable powder coated finish Specifications: Want to pick the perfect wallmount? Click here to read our comprehensive buying guide about choosing the perfect wallmount for your flat panel TV. Compliment your Wallmount with a Great Looking Flat Panel TV. Click here to take a look at our great selection of plasma and LCD TVs. Need Digital Cables? Click here to pick out an HDMI cable for your flat panel TV. NOTE: Shipments to the United Kingdom, Hawaii, Puerto Rico, Alaska, APO addresses or PO Boxes may require different shipping costs. Please call us at 888-488-2635 for details.

Portable Digital Audio Video Recorder w/ 128MB SD Card (**With Monitor PDR100M**)

This Lithium battery is compatible with the following Toshiba Digital Camera models: PDR-M4, PDR-M5, PDR-M70. Specifications: Rechargeable Lithium-Ion battery. No memory effect. (Does not need to be fully discharged before recharging) Capacity : 1200mAh. Operation time : up to 2 - 3 hours. Net weight : 37g Approx. Type : Aftermarket. Color: Gray. Best replacement for the original battery pack.

MEDIUM PERFORMANCE-LOOK PAINTED HOOD SCOOP Looks factory installed without painting! Custom scoop is painted at the factory to match popular original car colors perfectly! Easy to install with included double-sided tapeno drilling required! Approximately 12-5/8"W x 1-9/16"H x 27"L. Heavy-duty ABS plastic. To order, check your car's original color code found on driver's side door jamb label against factory color code listed in Item Description. Set of 2. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.

SMALL PERFORMANCE-LOOK PAINTED HOOD SCOOP Looks factory installed without painting! Custom scoop is painted at the factory to match popular original car colors perfectly! Easy to install with included double-sided tapeno drilling required! Approximately 10-1/2"W x 1-1/2"H x 19"L. Heavy-duty ABS plastic. To order, check your car's original color code found on driver's side door jamb label against factory color code listed in Item Description. Set of 2. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.

Designed to extend drop height for UPM50 Adjustable from 16.25 " - 19.25"

Small display mounts 7" to 22" Ultra thin fixed LCD mount, VESA compliant