The IDT1231U adapter cable takes
keyboard wedge output and converts it to USB/
Keyboard input, allowing the connection of a standard
keyboard interface device to the USB port of a
host...
More
The IDT1231U adapter cable takes
keyboard wedge output and converts it to USB/
Keyboard input, allowing the connection of a standard
keyboard interface device to the USB port of a
host computer. By plugging the reader's 6 pin mini DIN connector into the adapter, and the other end of the adapter into one of the
host's USB input ports, data from the reader will appear to the
host as if entered via the
keyboard. It is fully functional on a USB-equipped IBM PC or PC-compatible running Windows 98 and above, or on an Apple computer running Mac OS 8.1 and above. Any ID TECH reader can be programmed using the ID TECH USB Setup Utility. The Setup Utility allows you to enter commands through the
keyboard, just as if the device were physically connected between the
keyboard and the
host computer. If cable strain relief is desired, the PS/2 mini DIN connector housing is designed to accommodate a Velcro pad in a recessed portion of the fl at bottom of the housing. There is also a recessed groove to accommodate a Tyrap as another strain relief option. This
Keyboard to USB Adapter Cable is 30" long and designed to work with any ID TECH bar code or magnetic stripe reader that has a
keyboard wedge interface. The adapter can also be used with other manufacturers' products that utilize a
keyboard wedge interface.
Less