> NetGear ProSafe FS726T;GL:1;DIV:

The family of ProSafe Smart Switches is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2/Layer 3 management implementation. This PoE capable Smart Switch; FS726TP; provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized businesses. Using built-in standards based IEEE 802.3af PoE; the FS726TP offers web-based management including prioritization and SNMP making it ideal for deploying access points; VoIP phones and IP-based surveillance cameras. Package Contents : 24-port Smart Switch with Gigabit Ports FS726TP; Rubber footpads; Power cord; Rack-mount kit; Resource CD; Installation guide; Warranty/Support information card Affordable PoE on 12 ports Management capabilities at an unmanaged price Two gigabit ports for high speed connections Two SFP slots for optional fiber connectivity 24 10/100 ports for user connections Forwarding modes: Store-and-forward Bandwidth: 8.8 Gbps Network latency: <20µs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission Buffer memory: 256 KB embedded memory per unit Address database size: 8;000 media access control (MAC) addresses per system Addressing: 48-bit MAC address Mean Time Between Failure (MTBF): 300;000 hours (~34 years) 5 Year Manufacturer Warranty

Netgear ProSafe Smart Switches is designed for growing businesses that want control over their network without the cost and complexity. With the utility of 24 10/100 Mbps ports, two copper 10/100/1000 ports and two hot-swappable Small Form-factor Pluggable (SFP) GBIC slots for optional fiber connectivity, growing business networks, classrooms and workgroups can benefit from superior performance and keep up with expanding network needs. Power-over-Etherne t (PoE), optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP-based surveillance cameras. This high performing switch features a non-blocking wire-speed architecture with an 8.8Gbps switching capacity for maximum data throughput. This PoE capable Smart Switch, FS726TP, provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized businesses. Free your wireless AP deployments and IP cameras from the restrictions of power outlet proximity and enable uninterruptible power supply for all your PoE devices. Web-based Smart management features include performance monitoring, port configuration, VLAN for traffic control, port trunking for increased bandwidth and Class of Service (CoS) for traffic prioritization. Optimized for ProSafe Network Management Software (NMS100) and works with other SNMP-based management software.

NETGEAR ProSafe Smart Switches fill the gap between unmanaged and fully managed switches. The family of ProSafe Smart Switches is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2/Layer 3 management implementation. This second generation Smart Switch; FS726T; with affordable built-in gigabit power; easily connects to servers or a Gigabit-speed backbone for a non-stop 10/100/1000- enabled network that can quickly deliver large multimedia; image; and video files. With the utility of 24 10/100 Mbps ports; 2 copper 10/100/1000 ports and an SFP slot for optional fiber connectivity; growing business networks; classrooms and workgroups can benefit from superior performance and keep up with expanding network needs. Browser-based simple switch management 24 10/100 Mbps ports 2 10/100/1000 Mbps copper gigabit ports 1 SFP GBIC slot for optional fiber connectivity Rack mountable Network Ports: 24 10/100 Mbps auto sensing Fast Ethernet. 2 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports (RJ-45). 1 SFP slot for SFP GBIC Modules Package Contents: 24-port Smart Switch with Gigabit Ports FS726T; Rubber footpads; Power cord; Rack-mount kit; Resource CD; Installation guide; Warranty/Support information card Dimensions (W x D x H): 440 x 205 x 43 mm (17.8 x 8.1 x 1.6 in.) Weight: 2.5 kg (5.5 lb) 5 Year Manufacturer Warranty

ProSafe Smart Switch delivers built-in 802.3af PoE power for up to 12 devices plus an intuitive Web-browser interface that simplifies switch management - all at a very attractive price.

The NETGEAR® FS726TP ProSafe™ 24-Port 10/100 Smart Switch is designed for growing businesses that want control over their network without the complexity of a full Layer 2/Layer 3 management implementation. This PoE capable Smart Switch, FS726TP, provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized businesses. Using built-in standards based IEEE 802.3af PoE, the FS726TP offers Web-based management including prioritization and SNMP making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras. Two built-in Gigabit ports provides fast connections to servers or a Gigabit-speed backbone. With the utility of 24 10/100 Mbps ports, two copper 10/100/1000 ports and two hot-swappable Small Form-factor Pluggable (SFP) GBIC slots for optional fiber connectivity, you can keep up with expanding network needs. This high performing switch features a non-blocking wire-speed architecture with an 8.8 Gbps switching capacity for maximum data throughput. All 26 RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link. This switch comes with a rack mounting kit, rubber footpads and power cord.

The NETGEAR® FS726T ProSafe™ 24-Port 10/100 Gigabit Smart Switch that features built-in gigabit power, and easily connects to servers or a Gigabit-speed backbone for a 10/100/1000- enabled network that can quickly deliver large multimedia, image, and video files. With the featured 24 10/100 Mbps ports, 2 copper 10/100/1000 ports and an SFP slot for optional fiber connectivity, growing business networks, classrooms and workgroups can benefit from the FS726T's enhanced performance and keep up with expanding network needs. This high-performance switch features non-blocking wire-speed architecture with an 8.8 Gbps switching capacity for maximum data throughput. Its 26 RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link. In addition, an intuitive, Web-browser interface offers simple Smart Switch management, making it a snap to monitor switch performance, configure ports, set up port trunks, VLANs, and traffic prioritization. This switch is housed in a 17'' metal box and comes with a rack mounting kit and rubber footpads.

The NETGEAR® FS726TP ProSafe™ 24-Port 10/100 Smart Switch is designed for growing businesses that want control over their network without the complexity of a full Layer 2/Layer 3 management implementation. This PoE capable Smart Switch, FS726TP, provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized businesses. Using built-in standards based IEEE 802.3af PoE, the FS726TP offers Web-based management including prioritization and SNMP making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras. Two built-in Gigabit ports provides fast connections to servers or a Gigabit-speed backbone. With the utility of 24 10/100 Mbps ports, two copper 10/100/1000 ports and two hot-swappable Small Form-factor Pluggable (SFP) GBIC slots for optional fiber connectivity, you can keep up with expanding network needs. This high performing switch features a non-blocking wire-speed architecture with an 8.8 Gbps switching capacity for maximum data throughput. All 26 RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link. This switch comes with a rack mounting kit, rubber footpads and power cord.

The NETGEAR® FS726T ProSafe™ 24-Port 10/100 Gigabit Smart Switch that features built-in gigabit power, and easily connects to servers or a Gigabit-speed backbone for a 10/100/1000- enabled network that can quickly deliver large multimedia, image, and video files. With the featured 24 10/100 Mbps ports, 2 copper 10/100/1000 ports and an SFP slot for optional fiber connectivity, growing business networks, classrooms and workgroups can benefit from the FS726T's enhanced performance and keep up with expanding network needs. This high-performance switch features non-blocking wire-speed architecture with an 8.8 Gbps switching capacity for maximum data throughput. Its 26 RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link. In addition, an intuitive, Web-browser interface offers simple Smart Switch management, making it a snap to monitor switch performance, configure ports, set up port trunks, VLANs, and traffic prioritization. This switch is housed in a 17'' metal box and comes with a rack mounting kit and rubber footpads.

Part of the NETGEAR ProSafe Smart Switch family, this 24-port model fills the gap between unmanaged and fully managed switches. It's designed for growing organizations that want control over their network without the cost and complexity of a full Layer 2/Layer 3 management implementation. This PoE-capable Smart Switch provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized organizations. Using built-in standards based IEEE 802.3af PoE, the FS726TP offers web-based management including prioritization and SNMP making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras. Two built-in Gigabit ports provide fast connections to servers or a Gigabit-speed backbone. With the utility of 24 10/100 Mbps ports and two copper 10/100/1000 ports, growing classrooms and workgroups can benefit from superior performance and keep up with expanding network needs. This high performing switch features a non-blocking wire-speed architecture with an 8.8 Gbps switching capacity for maximum data throughput. All 26 RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink(tm) technology to make the right link. In addition, an intuitive, web-browser interface offers the simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. Alternatively, use SNMP-based software to manage your Smart Switch. Shipped ready for use straight out of the box, it delivers switching that's easy to set up and use. Specifications 24 10/100 Mbps auto sensing Fast Ethernet ports 2 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports (RJ-45) 2 SFP slots Standards compliance: IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X, IEEE 802.3x full-duplex flow control, IEEE 802.3af (Power over Ethernet) Forwarding modes: Store-and-forward Bandwidth: 8.8 Gbps Network latency: Buffer memory: 256KB embedded memory per unit Address database size: 8,000 media access control (MAC) addresses per system Addressing: 48-bit MAC address Mean Time Between Failure (MTBF): 300,000 hours (~34 years) Power consumption: 13W max.; 100-240VAC, 50-60Hz universal input PoE budget: 100W Dimensions (WxDxH): 17.8 x 8.1 x 1.6 in./44.0 x 20.5 x 4.3 cm Weight: 6.6 lb./3.0 kg System Requirements Network card for each computer Network cables Network software (e.g., Mac OS, Windows, Linux) In the box ProSafe 24-port Smart switch Rubber footpads Power cord Rack-mount kit Resource CD Installation guide Warranty Five-year limited Mfr. Part No.: FS726TPNA Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Actual print speeds will vary depending on computer and type of document printed. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.

This PoE capable Smart Switch, FS726TP, provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized businesses.

This PoE capable Smart Switch, FS726TP, provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized businesses.